XRPL EVM node is a free, open-source program for Windows that runs a node of the XRP Ledger Ethereum Virtual Machine (EVM) sidechain. It is built for developers, infrastructure operators and technically experienced XRP Ledger users who want to take part in the network rather than only use an app.
The sidechain is meant to bring web3 applications to the XRP Ledger community. The node runs as the exrpd daemon, and the network it joins belongs to the Cosmos ecosystem. The latest release is v11.3.0, and the code was last updated on October 30, 2026. This page covers the node software itself, not a wallet or trading tool.
What Is the XRP Ledger EVM Sidechain?
A sidechain is a separate blockchain that runs alongside a main network and connects to it, so assets and data can move between the two under defined rules. The XRP Ledger EVM sidechain follows this model and adds an Ethereum Virtual Machine layer. The EVM is the execution environment that many smart contracts are written for, so developers familiar with Ethereum tooling have a recognizable starting point.
The project describes the sidechain as a fast and secure blockchain intended to bring web3 applications to the XRP Ledger community. In practice, applications that need smart contracts can reach users who already hold XRP and use the XRP Ledger.
When you run the node, your machine receives and checks blockchain data itself rather than trusting a remote server. That is the main reason operators choose to run their own node.
Who Should Run an XRPL EVM Node?
Developers building web3 applications for the XRP Ledger community can run a local node to test contracts and read chain data without depending on a third-party service. Infrastructure teams supporting apps or internal services may want a node they control for reliability and privacy.
Curious users who want to understand how the sidechain works can also run the node on Windows, but they should expect a longer setup than installing a typical desktop app.
If your goal is simply to send XRP or interact with an application, a wallet is usually the right tool. A node does not hold a balance for you, and it does not replace a hardware wallet.
How a Blockchain Node Keeps Up With the Network
A blockchain node is a program that stores a copy of a chain's history, checks new blocks against the network rules, and shares data with other participants. Because every node verifies data independently, the network does not rely on one authority to decide which transactions are valid.
When a node starts, it connects to peers and downloads blocks in a process called synchronization. Until that finishes, the node may not reflect the latest state of the chain. The log output is the simplest way to see where it stands.
Nodes also expose an interface, often called an RPC endpoint, that other software can query. Wallets, dashboards and dApps can send requests to it to read balances or submit transactions. When the endpoint runs on your own machine, those requests do not pass through a third party.
Key features
Sidechain node for EVM applications
Background daemon process
Public Go source code
Ledger hardware wallet reference
Supported coins
The project documentation mentions Ethereum (ETH) and XRP in connection with the network. Because the sidechain is built around the Ethereum Virtual Machine, Ethereum-oriented tooling is a natural point of reference, while XRP is the asset most closely tied to the XRP Ledger community the sidechain serves.
How to install XRPL EVM node on Windows
- 1
Get the Windows build
Open the official GitHub Releases page for the project, linked from the source repository at github.com/xrplevm/node. Choose the Windows build or installer for the latest version, v11.3.0. Download only from the official website or GitHub, not from mirrors or forum links.
- 2
Verify the file
Compare the SHA-256 checksum of the downloaded file with the value published alongside the release. If a signature is provided, verify it as well. Do not run a file that does not match.
- 3
Run the installer
Start the installer or extract the Windows build into a folder you control. If Windows SmartScreen or your antivirus shows a warning, confirm the checksum again before continuing instead of turning protection off.
-
Initialize the node
Follow the setup instructions in the repository documentation to create the node configuration. Then start the exrpd process from a terminal and check the log output to confirm it is running.
How to use XRPL EVM node
Once the node is installed, the work is mostly about starting it correctly and confirming that it follows the network. Keep a terminal window open for the exrpd process during the first session.
- Open a terminal in the folder where the node is installed.
- Confirm the installed version matches v11.3.0.
- Initialize the node configuration as described in the repository documentation.
- Start the exrpd daemon and leave it running in the background.
- Watch the log output until the node reports that it is syncing or has caught up.
- If you plan to use a Ledger hardware wallet, set it up through the wallet's own software. Never type a seed phrase into the node or into any website.
- Stop the daemon cleanly before installing a newer version.
Pros & cons
- Free and open source, with public code on GitHub
- Written in Go and offered as a Windows build or installer
- Built for the XRP Ledger EVM sidechain and web3 applications
- Runs as a daemon, suited to long-running node operation
- Ledger hardware wallets are referenced in the documentation
- Requires comfort with the command line and node configuration
- Running a node is a longer commitment than installing a regular app
- Documentation is aimed at developers and operators rather than casual users
Is XRPL EVM node safe?
The XRPL EVM node is free and open source, and its code is published on GitHub at github.com/xrplevm/node. Use that repository or the official project channels to get the program, and never install it from a file shared by a stranger. Before running the file, compare its SHA-256 checksum with the value published alongside the release, or verify the signature if one is provided. A node is not a wallet, but it runs on your computer with network access, so keep any keys or seed phrases offline. Never enter a seed phrase on a third-party website or in a program that asks for it unexpectedly. Check the latest version on the official website before you update.
- Official source only. Download from github.com/xrplevm/node. Ignore ads and lookalike domains.
- Check the SHA-256. Compare the installer hash with the value the developer publishes before running it.
- Never share your seed phrase. No developer, support agent or website — including CryptApps — will ever ask for it.
Alternatives
Several Ethereum clients are relevant when you compare options. Geth is the official Go implementation of the Ethereum protocol, so it shares a language with this node but targets Ethereum rather than the XRP Ledger sidechain. Nethermind is an Ethereum execution client written for .NET, which suits teams already working in that stack. Erigon focuses on performance for Ethereum nodes.
Evmos also operates within the Cosmos ecosystem, making it the closest neighbor in network design, while the XRPL EVM node serves the XRP Ledger community. OpenEthereum, the former Parity client, is closed and is not a practical choice today.
Specifications
- Price
- Free
- Type
- Open source
- License
- —
- Latest version
- v11.3.0
- Last update
- 30 Oct 2026
- Windows support
- Yes (Windows build or installer)
- Source code
- github.com/xrplevm/node
Frequently asked questions
Yes, the program is free and open source. Its source code is published on GitHub, so you can read it, build it yourself or install a ready-made Windows build from the official release page.
Yes, a Windows build or installer is available. Download it from the official GitHub Releases page, verify the SHA-256 checksum, and then follow the setup steps in the repository documentation.
It can be, provided you get the file from the official repository and check its checksum or signature before running it. Keep seed phrases offline and never enter them on third-party websites or into unexpected prompts.
It is a sidechain that runs alongside the XRP Ledger and adds an Ethereum Virtual Machine environment. The project aims to bring web3 applications to the XRP Ledger community, and the node is the software that connects your computer to that chain.
No. Go is the language the program is written in, which matters mainly to developers who want to build from source. A ready-made Windows build or installer lets you run the node without installing Go.
The documentation references Ledger hardware wallets, so they are a supported option for keeping signing keys off the computer. Follow the wallet vendor's setup process, and never type a seed phrase into the node or any website.
Verdict
The XRPL EVM node suits developers, infrastructure operators and technically experienced XRP Ledger users who want to run their own EVM sidechain node on Windows. It is free, open source, written in Go and available as a Windows build or installer. It is less suited to people who only want to send payments or use an app, since a wallet covers those needs with far less setup. Read the release notes on GitHub before you commit to a long-running node.